The MultiMix 10 Wireless is a 10-channel, rack-mount mixer that is well suited to smaller clubs and venues, houses of worship, and traveling systems. Channels 1-4 are mono and offer both XLR mic inputs (selectable phantom power is provided) and balanced 1/4" inputs. TRS inserts are also provided. Channels 5/6 and 7/8 are stereo-paired channels, offering left and right balanced 1/4" ins. Channels 7/8 also offer a pair of stereo RCA inputs. Configured in stereo, Channels 9/10 are dedicated to receiving a stereo audio signal from any Bluetooth-enabled device. Simple, single-button front-panel pairing makes it easy. Each channel offers a peak LED, trim knob, 2-band EQ, pre and post sends, a pan knob, and a smooth-travelling 60mm fader.
On the back panel, the MultiMix 10 Wireless features 1/4" aux sends and 1/4" balanced stereo returns. The main stereo outs are 1/4" balanced, and an additional set of 1/4" stereo monitor outs are provided. Up on the front panel, the Master section includes additional easy-access XLR+1/4" combo inputs for Channels 1 and 2 that override the respective rear inputs, making it easy to temporarily connect a microphone or other sound source without removing the mixer from the rack. An 1/8" jack allows a non-Bluetooth source to access Channel 9. Located alongside the master fader, the twin 10-stage LED meters feature red peak indicators. A dedicated headphone jack is provided; the level is controlled by the monitor/phones knob. A very handy 1/8" output provides the main mix directly from the front panel.